Tablet mount 360 rotation white

The GRiPZO V3 is a mechanical anti-theft mount for smartphones, tablets and smartwatches on display. Each device type has its own clamp set, so the device fits properly and is held securely. The V3 works without cables, batteries, sensors or alarms.

• Smartphones: clamp sets with 2 or 4 claws
• Tablets: 4 clamp sets for a wide range of tablet sizes
• Smartwatches: 2 clamp sets, for square watches such as the Apple Watch and round watches such as the Samsung Galaxy Watch

The V3 is also suitable for foldable phones. A two-clamp set holds the phone open on the display.

With the optional lock and release function, staff use a key to remove the device together with the clamping top section, for example to store it after closing time.

Not sure which clamp set fits your device? Email info@gripzo.com and we will help you choose.

More information: anti-theft phone holder.

In a restaurant or shop a tablet often serves as till, order screen and payment point at once. The black GRiPZO 360 POS tablet mount keeps that tablet secured against theft and still fully usable. It fits tablets of 7 to 11 inches.

The mount turns a full circle and the viewing angle can be adjusted, so staff and customers can both read the screen. A unique key unlocks the tablet in seconds. That is handy when the tablet is also used to take orders at the table, or when it goes home after closing time.

• 360 degree rotation, viewing angle adjustable over 150 degrees
• Steel mount with hardened steel grips
• Purely mechanical: no electronics, alarms or cables
• Adjustable grips for tablets from 7 to 11 inches
• XL grip set available for tablets of 12 to 13 inches
• Can be fitted on a freestanding footplate

The mount is fixed with security screws, studs and nuts, or self-adhesive stickers, for example on glass.

More information: POS tablet stand and which holder fits my tablet.

Also available: Tablet mount 360 rotation white.

This black GRiPZO tablet holder keeps a 7 to 11 inch tablet secured against theft without electronics, alarms or cables. It is used on shop displays, at points of sale and in restaurants and hotels.

A unique key releases the tablet in seconds, so staff can take it along or store it after closing time. Locking it again is just as quick. The holder can be turned to landscape or portrait at any time.

• Universal holder for tablets from 7 to 11 inches
• Grips adjustable with 3 mm Allen screws
• Maximum tablet thickness 10 mm
• Hardened steel grips and four adjustable viewing angles
• Charging cable can run through the pole
• Fixed with security screws, studs and nuts, or two-component adhesive pads
• Weight 1.5 kg

A larger tablet? The XL version fits tablets of 12 to 13 inches.

More information: which holder fits my tablet.

The GRiPZO tablet holder secures a tablet of 7 to 11 inches mechanically against theft, in stores, at the till or in hospitality. This is the white version.

The tablet is locked with a quick-lock mechanism and released in seconds with a unique key, so it stays portable. The grips are adjusted with 3 mm Allen screws and take tablets up to 10 mm thick. The holder turns to portrait or landscape.

• For tablets from 7 to 11 inches, maximum thickness 10 mm
• Four adjustable viewing angles
• Purely mechanical, with hardened steel grips
• Charging cable can be routed through the pole
• Mounting with security screws, studs and nuts, or two-component adhesive pads
• Weight 1.5 kg

For tablets of 12 to 13 inches, choose the XL version.

More information: which holder fits my tablet.

This black GRiPZO 360 tablet mount XL secures a 12 to 13 inch tablet at the point of sale. Because the mount can rotate a full 360 degrees, it suits tablet registers where both staff and customer use the screen.

GRiPZO tablet mounts stand out for their quick-lock mechanism and very fast release with a unique key. The tablet is protected against theft during opening hours and can be taken out in seconds when needed.

• Universal mount for tablets from 12 to 13 inches
• Full 360 degree rotation
• Maximum tablet thickness 10 mm
• Adjustable grips, set with 3 mm Allen screws
• Purely mechanical security

A smaller tablet of 7 to 11 inches fits the standard 360 rotation tablet mount.

More information: POS tablet stand and which holder fits my tablet.

The GRiPZO 360 tablet mount XL is the point of sale mount for large tablets of 12 to 13 inches. It rotates a full circle, so the screen turns from staff to customer in one movement. This is the white version.

The tablet is held by a quick-lock mechanism and protected mechanically against theft. With the unique key it is released very quickly, which keeps the tablet portable.

• For tablets from 12 to 13 inches, maximum thickness 10 mm
• Rotates a full 360 degrees, ideal for tablet tills
• Grips adjustable with 3 mm Allen screws
• No electronics, alarms or cables

For tablets of 7 to 11 inches, choose the 360 rotation tablet mount.

More information: POS tablet stand and which holder fits my tablet.

Large tablets such as the iPad Pro need a larger mount. This black GRiPZO tablet mount XL holds tablets of 12 to 13 inches and protects them mechanically against theft on a display, counter or point of sale.

Staff lock the tablet with the quick-lock mechanism and release it very quickly with a unique key. The tablet therefore stays portable and can be stored after closing time.

• Universal mount for 12 to 13 inch tablets
• Maximum tablet thickness 10 mm
• Grips adjustable with 3 mm Allen screws
• Turns to both landscape and portrait
• No electronics, alarms or cables
• Fixed with security screws, studs and nuts, or two-component adhesive pads

Using a tablet of 7 to 11 inches? Then the standard tablet holder is the right size.

More information: which holder fits my tablet.

The GRiPZO tablet mount XL secures large tablets of 12 to 13 inches mechanically against theft, for example an iPad Pro. This is the white version.

The quick-lock mechanism holds the tablet firmly. With the unique key you release it in seconds, so the tablet stays portable. The mount can be turned to landscape or portrait.

• For tablets from 12 to 13 inches, maximum thickness 10 mm
• Grips adjustable with 3 mm Allen screws
• Purely mechanical: no electronics, alarms or cables
• Hardened steel grips
• Mounting with security screws, studs and nuts, or two-component adhesive pads

For tablets of 7 to 11 inches, choose the standard tablet holder.

More information: which holder fits my tablet.